+86-159-2181-9772 | ben.liu@ulilaser.com

Vehicle Radar

Process: Laser Solder Wire Soldering

Vehicle radar systems involve electrical connections and lead-pin soldering, with solder joints often concentrated within limited areas. During soldering, both the solder wire feeding position and the laser heating position need to be controlled simultaneously so that the solder is accurately applied to the target solder joint.

Laser solder wire soldering integrates controlled solder feeding with laser heating. The solder feeding path and laser irradiation area can be adjusted according to the solder joint location, helping overcome the spatial limitations encountered by conventional contact tools when operating in confined areas.

Before & After

What Challenges We Can Address?

  • Concentrated soldering locations for radar component leads and pins✅️
  • Need for soldering tools to avoid surrounding structures✅️
  • Precise alignment between the solder wire feeding position and the solder joint✅️
  • Controlled thermal exposure during the soldering process✅️
  • Consistent processing across multiple solder joints✅️
  • Reduced operator-dependent variation in the soldering process✅️

Need Help?

Tell us about your application — our engineers will recommend the right solution.

Talk to an Engineer